Edgecam - Sondowanie

Korzyści

Update the active or user definable work offset to accurately locate stock bodies from basic prismatic and cylindrical shapes, to secondary manufacturing stages through to complex castings using standard Renishaw Inspection Plus CNC Probing cycles.
Edgecam probing is fully integrated into the Edgecam interface and familiar terminology is used to allow data capture direct from Edgecam geometric features.
Intermediate positional moves are automatically and intelligently created by Edgecam probing to ensure protected positioning between features and reduce the risk of damage to the machine tool probe.
Full simulation is available within Edgecam prior to code generation to allow visualisation of potential collisions or prior to code generation.

Funkjonaność

Probing cycles available are:
- Bore (with or without internal obstacle) / Boss
  - User definable 3 point cycles or standard 4 point cycles available
- Pocket (with or without internal obstacle) / Web
- X or Y or Z surface
- Probe position (send the probe to any point in XYZ)
Update standard Work Offsets (G54-G59) in any X, Y and/or Z direction based on deviation from nominal
Digitise direct from Edgecam wireframe geometry or user definable input
Change the protected position federate to minimise traverse time and reduce cycle time
Alter the search region of the probe to allow for flexible piece part positioning
Full probe and tool path simulation available as standard
No need to alter existing post processor

Kompatybilność
Will work with the following Renishaw Inspection Plus packages for Horizontal or Vertical Machining Centres (Note Inspection Plus cycles MUST be installed on the machine):

Controller	Renishaw Inspection Plus Part Number
Fanuc Macro B 0M, 10-15M, 15iM, 16-21M / iM, 3xiM	A-4012-0516; A-4012-0685
Haas	A-4012-0880; A-4012-0890
Hitachi Seicos Σ10, Σ16, Σ18, MIII (M3), Lambda	A-4012-0749; A-4012-0761
Mazak M32, M Plus and Fusion 640M	A-4013-0023
Mazak Matrix M	A-4013-0112
Mitsubishi Meldas M3, M310, M320, M330, M335 series M50/M500 series M64, Magic 64, M600 series	A-4012-0516; A-4012-0685
Mori Seiki	A-4012-0936; A-4012-0942
Yasnac MX3, J50, I80, J100, J300	A-4014-0070; A-4014-0104

If you do not know or are unsure if your machine contains the relevant Inspection Plus macros, or whether the control is compatible with Edgecam Probing a flow diagram can be made available as a guide.

Licencja
Licencja Edgecam Probing module (ENPRB-0) potrzebuje system Edgecam (za wyjątkiem: Edgecam Communications, Edgecam Part Modeler & Wire EDM) wymagany wcześniej.

Wymagania Systemowe
Standardowe wymagania sprzętowe Edgecam oraz systemowe.
Pełna instalacja Edgecam.

Jeżeli jesteś zainteresowany, skontaktuj się z nami